Description
Caterpillar C27 engine rated at 1050 hp Tier 4F (no DEF)
98,000 lbs.
Engine load control
Automatic traction control
Front, rear, crab and coordinated steer
Direct hydraulic planetary track drives
Foot per minute meter
1300-gallon (4921 L) water tank with three fill stations
High pressure washdown system
Hydraulic variable flow water pump
Auto on/off spray water system
42” (1066 mm) wide primary conveyor with endless heavy-duty belt with 1” (25 mm) tall molded rubber cleats
42” (1066 mm) wide secondary conveyor with endless belt with 1” (25 mm) tall molded rubber cleats
Secondary conveyor has full 120-degree swing capability
Truck Rails on Secondary Conveyor
Self-cleaning head and tail pulleys
Left side/right side full function operators control stations
Lighted instrument console with liquid filled gauges
Air compressor with reservoir
Operator's console umbrella with mounting hardware
Ground level controls for moldboard, end gates & elevation
Remote grease fittings arranged in zones
Light package consisting of ten (10) 24 V lights
Two magnetic base 24 V DC halogen work lights
Six 24 V DC power outlets
Polyurethane bolt-on replaceable track pads
Shock mounted operator’s platform and console
Dust Extraction System
Safety controls including emergency engine shut-down, cutter disengage and engine shut-down when cutter door is opened
Rear back-up camera
Operator Seats - Includes an operator's seat for each control station that can be used during operation and then slid out of the way for standing operation or transport
ACE Grade and Slope Automation with Auto-Cut - Automates elevation of front and rear legs of milling machine by using grade sensors or a slope sensor for the right- and left-hand side of machine. System automates rear elevation of machine during entry of each cut. System includes 3 ACE Control panels that can be connected at the operator station and on the ground at the middle of the machine or in the rear to control both sides of the machine, 1 central microcontroller, 1 5-eye sonic sensor, plugs at side of machine for controls and sensors, mounting hardware, cables and junction boxes. Utilizes MOBA brand slope and sonic sensors.
Prewiring for ACE Averaging Ski - Includes junction boxes and cables to corners of machine for Averaging Ski, does not included sensors or mounting hardware.
ACE Single Averaging Ski – Includes 2 sonic sensors with 5 transducers each, 2 junction boxes, cables, and mounting hardware
ACE Dual averaging ski
Hydraulically folding canopy
9’ 2” (98") Cutter Housing
9’2” (98") Kennametal Single Hit Drum with 5/8” SpacingSpecifications
Year2019
ManufacturerROADTEC
ModelRX900E
Hours1,786
Serial Number4006
ConditionUsed
Operating ConditionOperable
Max Milling Width98 in
Max Milling Depth14 in
Teeth Spacing0.63 in
Operating Weight98,000 lb
Discharge ConveyorYes
Folding ConveyorYes
Depth ControlYes
Water SystemYes
Vacuum SystemYes
Grade ControlYes
CameraYes
Polyurethane Track PadsYes
Auxiliary LightingYes
Horsepower1,050 HP
Engine ManufacturerCATERPILLAR
Engine ModelC27
Year2019|
ManufacturerROADTEC|
ModelRX900E|
Hours1,786|
Serial Number4006|
ConditionUsed|
Operating ConditionOperable|
Max Milling Width98 in|
Max Milling Depth14 in|
Teeth Spacing0.63 in|
Operating Weight98,000 lb|
Discharge ConveyorYes|
Folding ConveyorYes|
Depth ControlYes|
Water SystemYes|
Vacuum SystemYes|
Grade ControlYes|
CameraYes|
Polyurethane Track PadsYes|
Auxiliary LightingYes|
Horsepower1,050 HP|
Engine ManufacturerCATERPILLAR|
Engine ModelC27|
