Get Financing1 - 28 of 53 Listings
RentAll
Hours: 6,193
Stock Number: US2878
Description: Title: Roadtec RX-900 Cold Planer
Used Roadtec RX-900 Cold Planer for sale.
6,193 Hours
CAT C27 Ter 3 Engine – 950 HP
Milling Width – 12’...
Updated: Monday, June 29, 2026 02:35 PM
Location: Rantoul, Illinois
36 Miles Away
Seller: Omnia Machinery US SALES
Hours: 2,313
Serial Number: EE200318
Stock Number: UN01099
Telematics: Yes
Auxiliary Lighting: Yes
Discharge Conveyor: Yes
Description: Pictures as of 7-20-26 with 2,313 hours
CAT G&S SYSTEM CONTROL
Folding Canopy
K STD 15 MM ROTOR
Online Owner's Manual
Ultra Low Sulfur Diesel...
Updated: Monday, July 20, 2026 08:54 AM
Location: Urbana, Illinois
49 Miles Away
Seller: ALTORFER INC
Hours: 329
Serial Number: MANRX405BA0010
Stock Number: C003204
Horsepower: 430 HP
Hours Meter: Accurate / Verified
Max Milling Width: 60 in
Description: Built for the job: 2024 ASTEC ROADTEC RX405
This used track cold planer is in operable condition and ready to perform. Powered by a 430 HP Cummi...
Updated: Tuesday, July 21, 2026 10:54 AM
Location: Burr Ridge, Illinois
64 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 400
Serial Number: 4027
Stock Number: C001970
Description: Low hour rental fleet machine, ready to go to work. Four track 7'2" width drum mill with the following options...
HYD FOLDING CONVEYOR
LINCOLN A...
Updated: Wednesday, July 22, 2026 12:50 PM
Location: Burr Ridge, Illinois
64 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 35
Serial Number: MANRX405BA0015
Stock Number: C003355
Horsepower: 430 HP
Hours Meter: Accurate / Verified
Max Milling Width: 60 in
Description: THE COMPACT DESIGN MAKES THE RX-405 IDEAL FOR SIZE-RESTRICTIVE MILLING.
The versatile RX-405 milling machine is ideal for contractors who need a s...
Updated: Wednesday, July 22, 2026 11:41 AM
Location: Burr Ridge, Illinois
64 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 475
Serial Number: 109
Stock Number: R001554
Description: 15,840 lbs, 130 HP @ 2,100 RPM, 4' 8" Width; 12' 8" Length, 20" drum width, 8" Cut Depth, 55 gal fuel capacity, 155 gal water capacity. Includes M...
Updated: Wednesday, July 22, 2026 12:05 PM
Location: Burr Ridge, Illinois
64 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 600
Serial Number: RX300E-128
Stock Number: R003586
Horsepower: 345 HP
Hours Meter: Accurate / Verified
Description: Roadtec RX-300 mill with 48" standard drum (5/8" spacing), Guardian telematics, and ACE Base system. Cummins QSL9 engine.
Updated: Wednesday, July 22, 2026 02:34 PM
Location: Burr Ridge, Illinois
64 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 838
Serial Number: 101882141016
Stock Number: C001005
Description: 24" GRINDING DRUM, REAR LOAD OUT CONVEYOR (Removable), hyd swing out rear leg, 4-wheel steer.
Updated: Wednesday, July 22, 2026 11:43 AM
Location: Burr Ridge, Illinois
64 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 6,537
Stock Number: US2915
Description: Title: Wirtgen W 220 i Cold Planer
Used Wirtgen W 220 i Cold Planer for sale.
6,537 Hours
CAT C18 ATAAC Tier 4f Engine – 801 HP
Milling W...
Updated: Wednesday, July 15, 2026 11:22 AM
Location: Muncie, Indiana
143 Miles Away
Seller: Omnia Machinery US SALES
Hours: 4,140
Stock Number: US2305
Description: Title: Wirtgen W 100 CFi Cold Planer
Used Wirtgen W 100 CFi Cold Planer for sale.
4,140 Hours
Cummins QSL 9 Tier 4f Engine – 345 HP
Milli...
Updated: Monday, June 29, 2026 08:09 AM
Location: Muncie, Indiana
143 Miles Away
Seller: Omnia Machinery US SALES
Hours: 235
Serial Number: 106
Stock Number: C002752
Description: 15,840 lbs, 130 HP @ 2,100 RPM, 4'8" width, 20" drum width; 12' 8" Length, 8" Cut Depth, 55 gal fuel capacity, 155 gal water capacity.
Updated: Wednesday, July 15, 2026 12:48 PM
Location: Milwaukee, Wisconsin
151 Miles Away
Hours: 7,632
Serial Number: CON-222
Stock Number: CON-222
Description: CAT 3412E ENGINE, 8'2" KENNAMETAL DRUM, WELL MAINTAINED, HOURS/LOCATION/CONDITIONS SUBJECT TO CHANGE
Updated: Friday, July 24, 2026 11:48 AM
Location: Byron Center, Michigan
179 Miles Away
Seller: Alta Equipment Co.
Hours: 271
Serial Number: NJX00261
Stock Number: NJX261
Description: BEACON, GRADE CTRL, SLOPE CTRL, PRODUCT LINK
CONDITION AND HOURS SUBJECT TO CHANGE
Online Owner's Manual
PLEASE CALL FOR MACHINE LOCATION
Equip...
Updated: Wednesday, July 15, 2026 09:07 AM
Location: Grand Rapids, Michigan
182 Miles Away
Seller: MICHIGAN CAT
Hours: 5,196
Serial Number: 09210386
Stock Number: 09210386
Description: CONDITION AND HOURS SUBJECT TO CHANGE
PLEASE CALL FOR MACHINE LOCATION
Equipment-certification-code: NCR
Updated: Wednesday, July 15, 2026 09:07 AM
Location: Grand Rapids, Michigan
182 Miles Away
Seller: MICHIGAN CAT
Serial Number: 09.21.14029639.0134
Description: 2004 Wirtgen W2100
CAT C18 Engine
7' Standard Pattern Drum
Believed to be Around 5,000 Hours, but Monitor is NOT Working
More Pictures and Vide...
Updated: Friday, July 17, 2026 07:50 AM
Location: Toledo, Ohio
237 Miles Away
Seller: Big D Heavy Equipment LLC
Hours: 1,474
Serial Number: 101883131036
Stock Number: 31-20979V
Description: Local Trade, just got out of the shop, Drum re-tooled with several new tool holders, serviced, New spray bar water pump installed, New track pads o...
Updated: Wednesday, July 22, 2026 02:31 PM
Location: Novi, Michigan
257 Miles Away
Seller: Southeastern Equipment Co.
Hours: 391
Serial Number: 101883281008
Stock Number: 281008
Description: Well caried for and ready to go to work!
Updated: Tuesday, July 21, 2026 02:52 PM
Location: Dublin, Ohio
258 Miles Away
Seller: Southeastern Equipment Co.
Hours: 1,588
Stock Number: US2541
Description: Title: Wirtgen W 1000 f Cold Planer
Used Wirtgen W 1000 f Cold Planer for sale.
1,588 Hours
KHD Deutz BF6M 1013CP Tier 2 Engine – 255 HP
Millin...
Updated: Wednesday, June 24, 2026 02:07 AM
Location: Auburn Hills, Michigan
276 Miles Away
Seller: Omnia Machinery US SALES
Hours: 208
Horsepower: 141 HP
Max Milling Width: 20 in
Max Milling Depth: 8 in
Engine Manufacturer: DEUTZ
Grade Control: Yes
Description: Equipped: Deutz TCD 4.1 engine, 141 HP; 20” / 0.5m cutter with HT08 holders: 8.3” / 21 cm max cut depth; 4 wheel drive; folding full length convey...
Updated: Friday, July 17, 2026 04:12 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
Hours: 1,347
Horsepower: 400 HP
Max Milling Width: 60 in
Max Milling Depth: 12 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins QSL 9, Horsepower: 400, Tier 4f, Drum Cutting Width: 5’ / 1.5m FCS, Drum Cutting Depth: 13” (330 mm), Track Pads: poly, C...
Updated: Friday, July 17, 2026 04:12 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
Hours: 1,901
Horsepower: 350 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Grade Control: Yes
Diagnostics: Yes
Description: Equipped: Engine: John Deere Horsepower:, Tier 4f, Drum Cutting Width: HT22, 48” LA 15, Cutting Depth: 13” (320mm), Track Pads: poly bolt, Conveyor...
Updated: Friday, July 17, 2026 04:12 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
Hours: 2,800
Horsepower: 227 HP
Max Milling Width: 40 in
Max Milling Depth: 12 in
Engine Manufacturer: DEUTZ
Grade Control: Yes
Description: Equipped: Engine: Duetz, Horsepower: 227, Tier 3, Drum Cutting Width: HT3, 40” / 1.0m LA 15, Cutting Depth: 12” (300mm), , Conveyor Belt Width: 24”...
Updated: Friday, July 17, 2026 04:12 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
Hours: 2,408
Horsepower: 350 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Canopy: Yes
Engine Manufacturer: JOHN DEERE
Description: Equipped: Engine: John Deere Horsepower:, Tier 4f, Drum Cutting Width: HT22, 48” LA 15, Cutting Depth: 13” (320mm), Track Pads: poly bolt, Conveyor...
Updated: Friday, July 17, 2026 04:12 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
Hours: 700
Horsepower: 640 HP
Max Milling Width: 87 in
Max Milling Depth: 12 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins Horsepower: 640, , Drum Cutting Width: 87” 2.2m, Cutting Depth: 13” (320mm), Track Pads: poly bolt-on , Conveyor Frame: ...
Updated: Friday, July 17, 2026 04:12 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
Hours: 4,931
Horsepower: 801 HP
Max Milling Width: 99 in
Max Milling Depth: 13 in
Engine Manufacturer: CATERPILLAR
Engine Model: C18
Description: Equipped: Engine: Cat C18 , Horsepower: 801 HP, Drum Cutting Width: 8’-3” (2.5m) with HT22 holders, Drum Cutting Depth: 13” / 320mm, Track Pads: p...
Updated: Friday, July 17, 2026 04:07 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
Hours: 5,600
Horsepower: 304 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins QSC 8.3, Horsepower: 304, Tier 3 Drum Cutting Width: 48” (1.2m) HT11 Flex cut, Drum Cutting Depth: 13” (320mm), Track Pad...
Updated: Friday, July 17, 2026 04:12 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
Hours: 4,140
Horsepower: 345 HP
Max Milling Width: 40 in
Max Milling Depth: 13 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins QDC 9, Horsepower: 345, Tier 4f, Drum Cutting Width: HT22, 40” LA 15, Cutting Depth: 13” (320mm), Track Pads: poly bolt, ...
Updated: Friday, July 17, 2026 04:12 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
Hours: 3,011
Horsepower: 800 HP
Max Milling Width: 86 in
Max Milling Depth: 13 in
Engine Manufacturer: CATERPILLAR
Engine Model: C18
Description: Equipped: Engine: C-18, Horsepower: 800, Drum Cutting Width: 86” Head, Drum Cutting Depth: 12” (30cm), Track Pads: poly 4 tracks, Conveyor Frame: f...
Updated: Friday, July 17, 2026 04:12 PM
Location: Grimes, Iowa
307 Miles Away
Seller: D. Storey Inc.
