Get Financing1 - 28 of 55 Listings
RentAll
Hours: 170
Serial Number: 101883281017
Stock Number: 014483
Canopy: Yes
Description: CAMERA MONITORING
MILL DRUM SW 1200
HOSE REEL AUTO ROLL-UP
FOLDABLE STEPS
HIGH PRESSURE CLEANER
SEAT FOR SERVICE
AUTOM LEVELLING
DUST COLLEC...
Updated: Wednesday, September 30, 2026 11:46 AM
Location: Bolingbrook, Illinois
79 Miles Away
Seller: MCCANN INDUSTRIES INC
Hours: 197
Serial Number: 101882091005
Stock Number: 013544
Max Milling Width: 19.69 in
Canopy: Yes
Description: MILLING DRUM 500mm
STEERING, 4-WHEEL VERSION
SCRAPER, SPLIT
LEVELLING, BASIC CONFIG
HYDRAULIC HAMMER CONNECTION
Updated: Wednesday, September 30, 2026 11:40 AM
Location: Bolingbrook, Illinois
79 Miles Away
Seller: MCCANN INDUSTRIES INC
Hours: 235
Serial Number: 106
Stock Number: C002752
Description: 15,840 lbs, 130 HP @ 2,100 RPM, 4'8" width, 20" drum width; 12' 8" Length, 8" Cut Depth, 55 gal fuel capacity, 155 gal water capacity.
Updated: Friday, October 09, 2026 07:45 AM
Location: Milwaukee, Wisconsin
82 Miles Away
Hours: 329
Serial Number: MANRX405BA0010
Stock Number: C003204
Horsepower: 430 HP
Hours Meter: Accurate / Verified
Max Milling Width: 60 in
Description: Built for the job: 2024 ASTEC ROADTEC RX405
This used track cold planer is in operable condition and ready to perform. Powered by a 430 HP Cummi...
Updated: Friday, October 09, 2026 07:45 AM
Location: Burr Ridge, Illinois
83 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 400
Serial Number: 4027
Stock Number: C001970
Description: Low hour rental fleet machine, ready to go to work. Four track 7'2" width drum mill with the following options...
HYD FOLDING CONVEYOR
LINCOLN A...
Updated: Friday, October 09, 2026 07:45 AM
Location: Burr Ridge, Illinois
83 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 35
Serial Number: MANRX405BA0015
Stock Number: C003355
Horsepower: 430 HP
Hours Meter: Accurate / Verified
Max Milling Width: 60 in
Description: THE COMPACT DESIGN MAKES THE RX-405 IDEAL FOR SIZE-RESTRICTIVE MILLING.
The versatile RX-405 milling machine is ideal for contractors who need a s...
Updated: Friday, October 09, 2026 07:45 AM
Location: Burr Ridge, Illinois
83 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 491
Serial Number: 109
Stock Number: R001554
Description: 15,840 lbs, 130 HP @ 2,100 RPM, 4' 8" Width; 12' 8" Length, 20" drum width, 8" Cut Depth, 55 gal fuel capacity, 155 gal water capacity. Includes M...
Updated: Monday, November 09, 2026 11:02 AM
Location: Burr Ridge, Illinois
83 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 600
Serial Number: RX300E-128
Stock Number: R003586
Horsepower: 345 HP
Hours Meter: Accurate / Verified
Description: Roadtec RX-300 mill with 48" standard drum (5/8" spacing), Guardian telematics, and ACE Base system. Cummins QSL9 engine.
Updated: Monday, November 09, 2026 11:02 AM
Location: Burr Ridge, Illinois
83 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 838
Serial Number: 101882141016
Stock Number: C001005
Description: 24" GRINDING DRUM, REAR LOAD OUT CONVEYOR (Removable), hyd swing out rear leg, 4-wheel steer.
Updated: Monday, November 09, 2026 11:02 AM
Location: Burr Ridge, Illinois
83 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 3,000
Description: Needs new bearing. Call for more info!
Updated: Wednesday, August 19, 2026 03:22 PM
Location: Chicago Ridge, Illinois
90 Miles Away
Seller: Christofano Equipment Co. Inc.
Hours: 938
Stock Number: US3066
Description: Title: Dynapac PL500T Cold Planer
Used Dynapac PL500T Cold Planer for sale.
938 Hours
Cummins QSB4.5-C110 Engine 110 HP
Milling Width – 2...
Updated: Wednesday, November 04, 2026 10:41 AM
Location: Rantoul, Illinois
151 Miles Away
Seller: Omnia Machinery US SALES
Hours: 7,632
Serial Number: CON-222
Stock Number: CON-222
Description: CAT 3412E ENGINE, 8'2" KENNAMETAL DRUM, WELL MAINTAINED, HOURS/LOCATION/CONDITIONS SUBJECT TO CHANGE
Updated: Monday, November 09, 2026 01:11 PM
Location: Byron Center, Michigan
187 Miles Away
Seller: Alta Equipment Co.
Hours: 5,196
Serial Number: 09210386
Stock Number: 09210386
Description: CONDITION AND HOURS SUBJECT TO CHANGE
PLEASE CALL FOR MACHINE LOCATION
Equipment-certification-code: NCR
Updated: Friday, October 30, 2026 11:54 AM
Location: Grand Rapids, Michigan
191 Miles Away
Seller: MacAllister Machinery Co.
Hours: 1,555
Serial Number: 67012168
Stock Number: 106690
Description: Location: Redmond, OR
Caterpillar 3408B Turbo Diesel Engine, Belt Driven Hydraulic Pump, Approx 78" Milling Head Width, Approx 12" Track Pad Width,...
Updated: Tuesday, November 03, 2026 08:28 AM
Location: Redmond, Oregon
199 Miles Away
Seller: Integrity Sales & Auction LLC
Hours: 9,604
Stock Number: 106700
Description: Location: Redmond, OR
8 Cylinder Detroit Turbo And Supercharged Diesel Engine, Belt Driven Hydraulic Pump, Approx 78" Milling Head Width, Approx 12...
Updated: Tuesday, November 03, 2026 08:28 AM
Location: Redmond, Oregon
199 Miles Away
Seller: Integrity Sales & Auction LLC
Hours: 3,198
Serial Number: 23200759
Stock Number: BCONDINDY
Hours Meter: Accurate / Verified
Description: Great condition and ready to work!
-STANDARD SPECS
-QUICK-CHANGE MILLING DRUM FB2200 (7'3") MCS BASIC
MILLING DRUM MCS BASIC FB2200 HT22 LA15 17...
Updated: Thursday, November 12, 2026 09:41 AM
Location: Indianapolis, Indiana
231 Miles Away
Seller: Brandeis Machinery
Hours: 467
Horsepower: 400 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Engine Manufacturer: JOHN DEERE
Grade Control: Yes
Description: Equipped: Engine: John Deere Horsepower: 400, Tier 4f, Drum Cutting Width: HT22, 48” LA 15, Cutting Depth: 13” (320mm), Track Pads: poly bolt, Conv...
Updated: Friday, November 06, 2026 03:35 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 2,897
Horsepower: 141 HP
Max Milling Width: 20 in
Max Milling Depth: 8.3 in
Engine Manufacturer: DEUTZ
Tire % Remaining: 95
Description: Equipped: Deutz TCD 4.1 engine, 141 HP; 20” / 0.5m cutter with HT08 holders: 8.3” / 21 cm max cut depth; 3 wheel drive; folding full length convey...
Updated: Friday, October 30, 2026 02:58 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 1,100
Horsepower: 798 HP
Max Milling Width: 88 in
Max Milling Depth: 12 in
Canopy: Yes
Engine Manufacturer: CATERPILLAR
Description: Equipped: Cat C-18 engine Horsepower: 798, Drum Cutting Width: 88” / 2.23m, Drum Cutting Depth: 12” (30cm), Track Pads: poly 4 tracks, Conveyor Fra...
Updated: Friday, October 09, 2026 03:00 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 3,200
Horsepower: 600 HP
Max Milling Width: 87 in
Max Milling Depth: 13 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins, 600 HP, Tier 4f; Drum Cutting Width: 87” (2.2m) HT 22 tootholders, Drum Cutting Depth: 13” / 320mm, Track Pads: poly, Co...
Updated: Friday, September 25, 2026 12:01 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 1,579
Horsepower: 765 HP
Shipping Width: 13 in
Shipping Length: 87 in
Max Milling Width: 87 in
Max Milling Depth: 13 in
Description: Equipped: Engine: John Deere 765 HP, Tier 3; Drum Cutting Width: 87” (2.2m) HT 22 tootholders, Drum Cutting Depth: 13” / 320mm, Track Pads: poly, C...
Updated: Sunday, September 13, 2026 08:29 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 5,760
Horsepower: 400 HP
Max Milling Width: 60 in
Max Milling Depth: 12 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins QSL 9, Horsepower: 400, Tier 4i, Drum Cutting Width: 5’/ 1.5m HT-11 non FCS, Drum Cutting Depth: 13” (330 mm), Track Pad...
Updated: Sunday, September 13, 2026 08:29 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 9,766
Horsepower: 680 HP
Max Milling Width: 87 in
Max Milling Depth: 13 in
Grade Control: Yes
Polyurethane Track Pads: Yes
Description: Equipped: Engine: Cummins x2, Horsepower: 680 HP, Tier 3; Drum Cutting Width: 87” (2.2m) HT 22 tootholders, Drum Cutting Depth: 13” / 320mm, Track ...
Updated: Monday, November 09, 2026 12:19 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 208
Horsepower: 141 HP
Max Milling Width: 20 in
Max Milling Depth: 8 in
Engine Manufacturer: DEUTZ
Grade Control: Yes
Description: Equipped: Deutz TCD 4.1 engine, 141 HP; 20” / 0.5m cutter with HT08 holders: 8.3” / 21 cm max cut depth; 4 wheel drive; folding full length convey...
Updated: Monday, November 09, 2026 12:18 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 1,901
Horsepower: 350 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Grade Control: Yes
Diagnostics: Yes
Description: Equipped: Engine: John Deere Horsepower:, Tier 4f, Drum Cutting Width: HT22, 48” LA 15, Cutting Depth: 13” (320mm), Track Pads: poly bolt, Conveyor...
Updated: Friday, November 06, 2026 03:35 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 2,408
Horsepower: 350 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Canopy: Yes
Engine Manufacturer: JOHN DEERE
Description: Equipped: Engine: John Deere Horsepower:, Tier 4f, Drum Cutting Width: HT22, 48” LA 15, Cutting Depth: 13” (320mm), Track Pads: poly bolt, Conveyor...
Updated: Monday, November 09, 2026 12:18 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 700
Horsepower: 640 HP
Max Milling Width: 87 in
Max Milling Depth: 12 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins Horsepower: 640, , Drum Cutting Width: 87” 2.2m, Cutting Depth: 13” (320mm), Track Pads: poly bolt-on , Conveyor Frame: ...
Updated: Friday, September 04, 2026 01:30 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
Hours: 4,931
Horsepower: 801 HP
Max Milling Width: 99 in
Max Milling Depth: 13 in
Engine Manufacturer: CATERPILLAR
Engine Model: C18
Description: Equipped: Engine: Cat C18 , Horsepower: 801 HP, Drum Cutting Width: 8’-3” (2.5m) with HT22 holders, Drum Cutting Depth: 13” / 320mm, Track Pads: p...
Updated: Monday, November 09, 2026 12:18 PM
Location: Grimes, Iowa
231 Miles Away
Seller: D. Storey Inc.
