Get Financing1 - 28 of 49 Listings
RentAll
Hours: 329
Serial Number: MANRX405BA0010
Stock Number: C003204
Horsepower: 430 HP
Hours Meter: Accurate / Verified
Max Milling Width: 60 in
Description: Built for the job: 2024 ASTEC ROADTEC RX405
This used track cold planer is in operable condition and ready to perform. Powered by a 430 HP Cummi...
Updated: Tuesday, July 21, 2026 10:54 AM
Location: Burr Ridge, Illinois
34 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 400
Serial Number: 4027
Stock Number: C001970
Description: Low hour rental fleet machine, ready to go to work. Four track 7'2" width drum mill with the following options...
HYD FOLDING CONVEYOR
LINCOLN A...
Updated: Wednesday, July 22, 2026 12:50 PM
Location: Burr Ridge, Illinois
34 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 35
Serial Number: MANRX405BA0015
Stock Number: C003355
Horsepower: 430 HP
Hours Meter: Accurate / Verified
Max Milling Width: 60 in
Description: THE COMPACT DESIGN MAKES THE RX-405 IDEAL FOR SIZE-RESTRICTIVE MILLING.
The versatile RX-405 milling machine is ideal for contractors who need a s...
Updated: Wednesday, July 22, 2026 11:41 AM
Location: Burr Ridge, Illinois
34 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 600
Serial Number: RX300E-128
Stock Number: R003586
Horsepower: 345 HP
Hours Meter: Accurate / Verified
Description: Roadtec RX-300 mill with 48" standard drum (5/8" spacing), Guardian telematics, and ACE Base system. Cummins QSL9 engine.
Updated: Wednesday, July 22, 2026 02:34 PM
Location: Burr Ridge, Illinois
34 Miles Away
Seller: FINKBINER EQUIPMENT
Hours: 3,039
Serial Number: 101883011003
Horsepower: 348.67 HP
Operating Weight: 55,093.52 lb
Description: Well-maintained 2014 Bomag BM 1200/35 cold planer available and ready for work. This versatile milling machine is ideal for asphalt removal, roadwa...
Updated: Tuesday, September 08, 2026 10:20 AM
Location: Lemont, Illinois
34 Miles Away
Seller: Jim Murphy
Hours: 3,000
Description: Needs new bearing. Call for more info!
Updated: Wednesday, August 19, 2026 03:22 PM
Location: Chicago Ridge, Illinois
41 Miles Away
Seller: Christofano Equipment Co. Inc.
Hours: 6,193
Stock Number: US2878
Description: Title: Roadtec RX-900 Cold Planer
Used Roadtec RX-900 Cold Planer for sale.
6,193 Hours
CAT C27 Ter 3 Engine – 950 HP
Milling Width – 12’...
Updated: Tuesday, September 08, 2026 06:11 AM
Location: Rantoul, Illinois
115 Miles Away
Seller: Omnia Machinery US SALES
Hours: 5,115
Stock Number: US2877
Description: Title: Roadtec RX-700e Cold Planer
Used Roadtec RX-700e Cold Planer for sale.
5,115 Hours
CAT C18 Tier 4i Engine – 755 HP
Milling Width –...
Updated: Tuesday, September 08, 2026 06:11 AM
Location: Rantoul, Illinois
115 Miles Away
Seller: Omnia Machinery US SALES
Hours: 7,300
Stock Number: US1705
Description: Title: Wirtgen W 250 I Cold Planer
Used Wirtgen W 250 I Cold Planer for sale.
7,300 Hours
Cummins QSX 15 + QSL 9 Tier 4f engine – 1,010 HP
...
Updated: Thursday, September 17, 2026 07:54 AM
Location: Glenbeulah, Wisconsin
128 Miles Away
Seller: Omnia Machinery US SALES
Hours: 7,632
Serial Number: CON-222
Stock Number: CON-222
Description: CAT 3412E ENGINE, 8'2" KENNAMETAL DRUM, WELL MAINTAINED, HOURS/LOCATION/CONDITIONS SUBJECT TO CHANGE
Updated: Tuesday, September 15, 2026 01:56 PM
Location: Byron Center, Michigan
154 Miles Away
Seller: Alta Equipment Co.
Hours: 5,196
Serial Number: 09210386
Stock Number: 09210386
Description: CONDITION AND HOURS SUBJECT TO CHANGE
PLEASE CALL FOR MACHINE LOCATION
Equipment-certification-code: NCR
Updated: Monday, September 14, 2026 07:41 AM
Location: Grand Rapids, Michigan
158 Miles Away
Seller: MacAllister Machinery Co.
Stock Number: 668011
Description: 2007 WIRTGEN GMBH W120F COLD PLANER SN: 08.10.0147 HOUR METER READS: 7,908 Quantity: 1
Updated: Tuesday, September 15, 2026 09:55 AM
Location: Clayton, Indiana
190 Miles Away
Seller: Freije & Freije
Hours: 4,140
Stock Number: US2305
Description: Title: Wirtgen W 100 CFi Cold Planer
Used Wirtgen W 100 CFi Cold Planer for sale.
4,140 Hours
Cummins QSL 9 Tier 4f Engine – 345 HP
Milli...
Updated: Tuesday, September 08, 2026 06:11 AM
Location: Muncie, Indiana
202 Miles Away
Seller: Omnia Machinery US SALES
Hours: 4,141
Serial Number: WGW00622CWIA01085
Stock Number: H61434B
Description:
Updated: Tuesday, August 18, 2026 07:52 AM
Location: Lansing, Michigan
209 Miles Away
Seller: AIS Construction Eq- Lansing
Serial Number: 09.21.14029639.0134
Description: 2004 Wirtgen W2100
CAT C18 Engine
7' Standard Pattern Drum
Believed to be Around 5,000 Hours, but Monitor is NOT Working
More Pictures and Vide...
Updated: Tuesday, July 28, 2026 08:04 AM
Location: Toledo, Ohio
258 Miles Away
Seller: Big D Heavy Equipment LLC
Hours: 1,474
Serial Number: 101883131036
Stock Number: 31-20979V
Description: Local Trade, just got out of the shop, Drum re-tooled with several new tool holders, serviced, New spray bar water pump installed, New track pads o...
Updated: Wednesday, September 09, 2026 07:25 AM
Location: Novi, Michigan
259 Miles Away
Seller: Southeastern Equipment Co.
Hours: 13,725
Serial Number: 519083
Description: CMI PR-500 FL Asphalt Milling Machine, Good condition, 13¥ hours, Works as it should, Very well taken care of and regularly maintained, Runs and op...
Updated: Tuesday, September 15, 2026 10:07 AM
Location: Belleville, Michigan
259 Miles Away
Seller: Global Land Equipment
Hours: 1,579
Horsepower: 765 HP
Shipping Width: 13 in
Shipping Length: 87 in
Max Milling Width: 87 in
Max Milling Depth: 13 in
Description: Equipped: Engine: John Deere 765 HP, Tier 3; Drum Cutting Width: 87” (2.2m) HT 22 tootholders, Drum Cutting Depth: 13” / 320mm, Track Pads: poly, C...
Updated: Sunday, September 13, 2026 08:29 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 5,760
Horsepower: 400 HP
Max Milling Width: 60 in
Max Milling Depth: 12 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins QSL 9, Horsepower: 400, Tier 4i, Drum Cutting Width: 5’/ 1.5m HT-11 non FCS, Drum Cutting Depth: 13” (330 mm), Track Pad...
Updated: Sunday, September 13, 2026 08:29 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 9,766
Horsepower: 680 HP
Max Milling Width: 87 in
Max Milling Depth: 13 in
Grade Control: Yes
Polyurethane Track Pads: Yes
Description: Equipped: Engine: Cummins x2, Horsepower: 680 HP, Tier 3; Drum Cutting Width: 87” (2.2m) HT 22 tootholders, Drum Cutting Depth: 13” / 320mm, Track ...
Updated: Friday, September 04, 2026 01:30 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 1,901
Horsepower: 350 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Grade Control: Yes
Diagnostics: Yes
Description: Equipped: Engine: John Deere Horsepower:, Tier 4f, Drum Cutting Width: HT22, 48” LA 15, Cutting Depth: 13” (320mm), Track Pads: poly bolt, Conveyor...
Updated: Friday, September 04, 2026 01:30 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 2,800
Horsepower: 227 HP
Max Milling Width: 40 in
Max Milling Depth: 12 in
Engine Manufacturer: DEUTZ
Grade Control: Yes
Description: Equipped: Engine: Duetz, Horsepower: 227, Tier 3, Drum Cutting Width: HT3, 40” / 1.0m LA 15, Cutting Depth: 12” (300mm), , Conveyor Belt Width: 24”...
Updated: Friday, September 04, 2026 01:30 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 2,408
Horsepower: 350 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Canopy: Yes
Engine Manufacturer: JOHN DEERE
Description: Equipped: Engine: John Deere Horsepower:, Tier 4f, Drum Cutting Width: HT22, 48” LA 15, Cutting Depth: 13” (320mm), Track Pads: poly bolt, Conveyor...
Updated: Friday, September 04, 2026 01:30 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 700
Horsepower: 640 HP
Max Milling Width: 87 in
Max Milling Depth: 12 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins Horsepower: 640, , Drum Cutting Width: 87” 2.2m, Cutting Depth: 13” (320mm), Track Pads: poly bolt-on , Conveyor Frame: ...
Updated: Friday, September 04, 2026 01:30 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 4,931
Horsepower: 801 HP
Max Milling Width: 99 in
Max Milling Depth: 13 in
Engine Manufacturer: CATERPILLAR
Engine Model: C18
Description: Equipped: Engine: Cat C18 , Horsepower: 801 HP, Drum Cutting Width: 8’-3” (2.5m) with HT22 holders, Drum Cutting Depth: 13” / 320mm, Track Pads: p...
Updated: Friday, September 04, 2026 02:27 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 5,600
Horsepower: 304 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins QSC 8.3, Horsepower: 304, Tier 3 Drum Cutting Width: 48” (1.2m) HT11 Flex cut, Drum Cutting Depth: 13” (320mm), Track Pad...
Updated: Friday, September 04, 2026 01:28 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 4,592
Horsepower: 400 HP
Max Milling Width: 59 in
Max Milling Depth: 13 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins QSL 9, Horsepower: 400, Tier 4i, Drum Cutting Width: 5’ non FCS, Drum Cutting Depth: 13” (330 mm), Track Pads: poly, Conv...
Updated: Friday, September 04, 2026 01:30 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
Hours: 4,350
Horsepower: 345 HP
Max Milling Width: 48 in
Max Milling Depth: 12 in
Engine Manufacturer: CUMMINS
Grade Control: Yes
Description: Equipped: Engine: Cummins QDC 9, Horsepower: 345, Tier 4f, Drum Cutting Width: HT22, 48” LA 15, Cutting Depth: 13” (320mm), Track Pads: poly bolt, ...
Updated: Friday, September 04, 2026 01:30 PM
Location: Grimes, Iowa
271 Miles Away
Seller: D. Storey Inc.
