Print
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    2024 GOMACO GP3 Used Concrete Pavers for sale2024 GOMACO GP3 Used Concrete Pavers for sale
    Photos(11)

    2024 GOMACO GP3

    $900,000 

    Seller Information

    View Seller Information

    CLOSNER EQUIPMENT CO INC

    Contact:Logan Maywald

    San Antonio, Texas 78207

    General

    Year
    2024
    Manufacturer
    Model
    Hours
    1,200
    Serial Number
    912600-062
    Condition
    Used
    Hours Meter
    Accurate / Verified
    Product Configuration
    4-Track
    Operating Condition
    Operable
    Description
    One - Gomaco GP-3 4-Track, 2024 Model C7.1 liter Caterpillar Diesel Engine – 300 hp – Tier 4 Final Fuel Reservoir 160 gal. (605.7 liter) Hydraulic Oil Reservoir 230 gal. (870.6 liter) One Heat Exchanger Sixteen Hydraulic Vibrators Thirty Hydraulic Vibrator Circuits With Individual Variable Controls Hydraulic Pump System * four load-sensed hydraulic pump * two pressure-compensated lift circuit pump G+ Control System and G+ Connect * self-diagnostic system with 6.5 in. (165 mm) anti-glare graphical display * operates in multiple languages * with CAN network controller for front and rear grade, steering and reverse steering * includes dual grade for sensoring stringline on both sides of machine simultaneously * G+ Connect utilizes CAN network allowing all G+ accessories to easily communicate with each other for precision setup and paving Automatic On/Off Control for Vibrators and Tamper Bars * synchronized with machine movement Hydraulic Rotational Swing Pivot Arms for Leg Positioning * with sensor feedback Hydraulic Track Rotation for Steering * with sensor feedback Four Crawler Tracks - Series Two * 7 ft. 4 in. (2.13 m) long includes track fender * 4 ft. 5.12 in. (1.35 m) center-to-center of sprockets * 15.75 in. (400 mm) wide pads with street grousers * 100:1 gear reduction with two-speed hydraulic motors Polyurethane Track Pads * bolt to chain * for series two tracks with 15.75 in. (400 mm) wide pads * 120 pads required - 625-54C24 7 ft. (2.13 m) Dual Telescoping Main Frame * with incorporated T-Rail for mounting paving mold anywhere on telescoping frame * main frame telescoping from 12 ft. (3.66 m) to 26 ft. (7.92 m), frame extension required over 26 ft. (7.92 m) * with smart cylinders for accurate frame widening High-Pressure/Pressurized Water System - 300 Gallon (1,135.6 liter) * includes two 150 gal. (567.6 liter) steel tanks, 9.5 cfm (.27 cmm) air compressor, hydraulically driven high pressure pump, trigger gun control and adjustable pressure unloader for 0-2000 psi 24 ft. Wide - 5000 Series - Open Front Slipform Mold * includes one 4 ft. (1.22 m) left-hand end section with flat or curb profile insert * one 4 ft. (1.22 m) right-hand end section with flat or curb profile insert * hydraulic adjustable “split” sideplates * pressure-compensated for slab depths from 0 to 19 in. (0 to 483 mm) * ratchet style edge slump adjustment * one 4 ft. (1.22 m) wide self-supporting transition adjuster with power transition adjuster (PTA) * one 3 ft. (.91 m) wide insert * four 2 ft. (.61 m) wide inserts * one 1 ft. (.3 m) wide insert * hydraulically powered split tamper bar system * 16 in. (406 mm) diameter reversible split front augers with center auger drives 24 ft. 5400 Series Plow Strike-Off Assembly * with one left-hand end section assembly * with one right-hand end section assembly * with one 4 ft. (1.22 m) transition adjuster center insert with hydraulic crown adjustment * two 2 ft. (.61 m) wide inserts * four 3 ft. (.91 m) wide inserts * with 10 in. (254 mm) hydraulic height adjustment * mounts to paver frame T-rail, independent of the paving mold * with spreader plow assembly * with plow control box assembly * with 20 in. (508 mm) of hydraulic height adjustment Telescoping Aluminum Work Platform Modular Electronic Control Panel Operator’s Station * engineered for easy monitoring of all hydraulic controls and electronic sensoring functions Emergency Stop Switches GOMACO Hardware and GOMACO Machine Software for 3-D Ready * power conditioner, two prism masts (no prisms), electrical assembly, mount post assembly for computer (computer not included) and software for G+ controller (Note: Does not include the 3D equipment required to pour stringless. Any 3D equipment will need to be priced out separately.) GOMACO Remote Diagnostics * GRD is GOMACO’s version of telematics and carries a two year data plan * can download software from GOMACO directly to the machine * can see GSI readings from remote location * can troubleshoot machine through GRD Light System for Night Operation * 14 ea. LED 9-32 VDC lights and mounts Factory Warranty Expired

    Category Specific

    Telescoping Frame
    Yes

    Chassis

    Number of Tracks
    4
    Polyurethane Track Pads
    Yes

    Exterior

    Auxiliary Lighting
    Yes